Impact of Inducer Tip Clearance on Cryopump Performance
Open Access
Abstract
Inducers play a critical role in pump operation by providing a preliminary pressure boost to suppress cavitation. The size of the tip clearance directly influences a pump’s operational efficiency. To investigate the impact of tip clearance on a pump’s hydraulic performance and its behavior under cavitation conditions, this study combines experimental and numerical simulation approaches. Numerical computations of the full flow field, including the inducer and a two-stage impeller, were performed for five liquefied natural gas (LNG) cryogenic inducers with different tip clearances. The accuracy of the numerical simulation results was validated by comparing them with the experimentally obtained hydraulic performance curves. The results yield cavitation performance curves, pressure distributions at incipient cavitation, vapor volume fraction contours, and leakage flow streamlines for various tip clearances. The impact of tip clearance on the overall hydraulic performance and cavitation behavior of the LNG inducer was systematically examined, with particular attention given to the microscopic evolution of the Tip Leakage Vortex (TLV) during the initial stages of cavitation. The experimental results indicate that for every 0.2 mm increase in the inducer tip clearance, the pump head decreases by approximately 1 m, the efficiency drops by about 0.2%, and the tip leakage flow rate increases by approximately 5 m3/h. Furthermore, under cavitation conditions, the cavitation area expands as the tip clearance increases. A critical clearance value, δ, exists within the range of 0.4 mm to 0.6 mm, which governs the development pattern of the TLV. When the clearance is smaller than δ, the TLV forms more rapidly, and cavitation development is significantly more sensitive to increases in tip clearance. Conversely, when the clearance exceeds δ, the formation of the TLV is delayed, and cavitation progression becomes less responsive to further increases in tip clearance.Keywords
All Related Versions
Funding Information
- National Key R&D Program Project (2025YFE0102900)
- Key Research and Development Program of Zhejiang Province (2025C02030)
- International Cooperation and Exchange Projects of the National Natural Science Foundation of China (W2521089)
- National Natural Science Foundation of China (52376037)
- Central Government Guiding Local Science and Technology Development Fund Project (2025ZY01030)
This publication has 15 references indexed in Scilit:
- Experimental investigation of cavitation instabilities in inducer with different tip clearancesChinese Journal of Aeronautics, 2021
- Studies of cavitation characteristics of inducers with different blade numbersAIP Advances, 2021
- Investigations on the effect of tip clearance gap and inducer on the transport of air-water two-phase flow by centrifugal pumpsChemical Engineering Science, 2020
- Effect of meridian plane dip angle of the variable pitch inducer blade on cavitation performance of high-speed centrifugal pumpJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Cavitation Performance of Constant and Variable Pitch Helical Inducers for Centrifugal Pumps: Effect of Inducer Tip ClearanceJournal of Fluids Engineering, 2019
- Visual experiment and numerical simulation of cavitation instability in a high-speed inducerProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2019
- Numerical and Experimental Investigation of Tip Leakage Vortex Cavitation Patterns and Mechanisms in an Axial Flow PumpJournal of Fluids Engineering, 2015
- Effects of the short blade locations on the anti-cavitation performance of the splitter-bladed inducer and the pumpChinese Journal of Chemical Engineering, 2015
- Numerical and experimental investigation of tip leakage vortex trajectory and dynamics in an axial flow pumpComputers & Fluids, 2015
- Mind the gap - tip leakage vortex in axial turbinesIOP Conference Series: Earth and Environmental Science, 2014