Impact of Inducer Tip Clearance on Cryopump Performance
Preprint
- 26 November 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
To investigate the influence of different tip clearances on the hydraulic performance and cavitation characteristics of a cryogenic inducer, this study builds upon previous research by employing the SST k-ω turbulence model and modifying the empirical coefficients for evaporation and condensation in the Zwart cavitation model. Numerical simulations of the full flow field within an LNG cryogenic inducer were conducted. The results yielded cavitation performance curves, pressure distributions at incipient cavitation, vapor volume fraction contours, and leakage flow streamlines for various tip clearances. The impact of tip clearance on the overall hydraulic performance and cavitation behavior of the LNG inducer was systematically examined, with particular attention given to the microscopic evolution of the Tip Leakage Vortex (TLV) during the initial stages of cavitation. Experimental findings indicate that as the tip clearance increases, the tip leakage flow intensifies, leading to greater energy losses within the inducer and a consequent slight reduction in pump head and efficiency. A critical clearance value, δ, exists within the range of 0.4 mm to 0.6 mm, which governs the development pattern of the TLV. When the clearance is smaller than δ, the TLV forms more rapidly, and cavitation development is significantly more sensitive to increases in tip clearance. Conversely, when the clearance exceeds δ, the formation of the TLV is delayed, and cavitation progression becomes less responsive to further increases in tip clearance.Keywords
All Related Versions
- Version 1, 2025-11-26, Preprints
- Published version: Water, 18 (2), 217.
This publication has 19 references indexed in Scilit:
- Experimental investigation of cavitation instabilities in inducer with different tip clearancesChinese Journal of Aeronautics, 2021
- Studies of cavitation characteristics of inducers with different blade numbersAIP Advances, 2021
- Evaluation of vorticity forces in thermo-sensitive cavitating flow considering the local compressibilityInternational Communications in Heat and Mass Transfer, 2021
- Investigations on the effect of tip clearance gap and inducer on the transport of air-water two-phase flow by centrifugal pumpsChemical Engineering Science, 2020
- Effect of meridian plane dip angle of the variable pitch inducer blade on cavitation performance of high-speed centrifugal pumpJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Effects of the number of inducer blades on the anti-cavitation characteristics and external performance of a centrifugal pumpJournal of Mechanical Science and Technology, 2016
- Anti-cavitation performance of a splitter-bladed inducer under different flow rates and different inlet pressuresScience China Technological Sciences, 2015
- Effects of the short blade locations on the anti-cavitation performance of the splitter-bladed inducer and the pumpChinese Journal of Chemical Engineering, 2015
- Numerical and experimental investigation of tip leakage vortex trajectory and dynamics in an axial flow pumpComputers & Fluids, 2015
- Numerical and experimental investigations on the cavitation characteristics of a high-speed centrifugal pump with a splitter-blade inducerJournal of Mechanical Science and Technology, 2015