Minimizing the Size and Ozone Emission of Electrostatic Precipitators Using Dielectric and Rolled Carbon Film Coatings
- 26 October 2021
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (1) , 753-759
Abstract
Electrostatic precipitators (ESPs) are widely used to control air pollution. However, their applications in portable air cleaners are limited owing to ozone generation during the discharging process. In this article, we developed a compact two-stage ESP that combines corona discharging and particle collection modules. The former generates an extremely small amount of ozone using dielectric film coating, whereas the latter has a large specific surface area. A polypropylene (PP) film is coated as a dielectric material on the ground electrode of the discharging module. The corona current is reduced by the PP film, which in turn reduces the ozone generation. The efficiency of atmospheric particle collection and ozone generation were evaluated by varying the flow rates and applied voltages of the four-channel discharging and roll-type collection modules. Additionally, the specific surface area of 707 m2/m3 of the roll-type collection module minimized the size of the device by increasing its integrity. The proposed ESP with PP coating exhibited the tendency of a conventional ESP that follows the Deutsch equation. All particles of size over 1 μm were removed from the atmosphere by the proposed device at a flow rate of 194.4 L/min, which is more than three times that of human breathing. Furthermore, our experimental device removed more than 50% of the ultrafine particles of size 0.3 μm without ozone generation. Therefore, the proposed device can be potentially used in portable or wearable air-cleaning devices to aid individual healthcare.Keywords
Funding Information
- Basic Research Fund (NK231A)
- Korea Institute of Machinery and Materials, Republic of Korea
- The ultraclean machinery technologies of future electric generation or power systems against PM2.5 fine particles and greenhouse gases
- Korea Institute of Machinery and Materials (20012263)
- Korea Evaluation Institute of Industrial Technology
- Ministry of Trade, Industry and Energy of the Republic of Korea
This publication has 30 references indexed in Scilit:
- Submicrometer particle removal indoors by a novel electrostatic precipitator with high clean air delivery rate, low ozone emissions, and carbon fiber ionizerIndoor Air, 2013
- Characteristics of an electrostatic precipitator for submicron particles using non-metallic electrodes and collection platesJournal of Aerosol Science, 2010
- Effect of electrode thickness for reducing ozone generation in electrostatic precipitatorElectronics and Communications in Japan, 2010
- Unipolar Charging of Fine and Ultra-Fine Particles Using Carbon Fiber IonizersAerosol Science and Technology, 2008
- Electrical behavior of polypropylene/multiwalled carbon nanotube nanocomposites with low percolation thresholdScripta Materialia, 2007
- Effect of an Ionic Air Cleaner on Indoor/Outdoor Particle Ratios in a Residential EnvironmentAerosol Science and Technology, 2007
- On assessment of ozone generation in dc coronasJournal of Physics D: Applied Physics, 2000
- Ozone emissions from a “personal air purifier”,Journal of Exposure Science & Environmental Epidemiology, 1999
- Ozone Generation by Indoor, Electrostatic Air CleanersAerosol Science and Technology, 1997
- Conductive polymer blends with low carbon black loading: Polypropylene/polyamidePolymer Engineering & Science, 1996