Bending Performance and Evaluation of Tensile Properties of Polyester Fiber Reinforced Ductile Fiber Reinforced Cementitious Composite (PES-DFRCC)
Open Access
- 5 November 2026
- journal article
- Published by Bentham Science Publishers Ltd. in The Open Construction & Building Technology Journal
- Vol. 20 (1)
Abstract
Introduction/Objective: This study investigates the flexural and equivalent tensile behaviour of polyester fiber-reinforced ductile fiber-reinforced cementitious composite (PES-DFRCC) incorporating commercially available Indian-manufactured polyester fibers. The influence of fiber volume fraction on the flexural response and equivalent tensile properties was evaluated through four-point bending tests and inverse section analysis. This study presents the first experimental investigation of PES-DFRCC using this methodology and establishes its equivalent tensile stress–strain behaviour. Methods: Beam specimens containing different polyester fiber volume fractions were tested under four-point bending in accordance with ISO 21914:2019. Load, axial deformation, and deflection measurements were recorded, and tensile properties were determined through inverse section analysis based on the observed flexural response. Results: The PES-DFRCC specimens exhibited multiple microcracking and pronounced deflection-hardening behavior under bending. The evaluated average tensile strength ranged from 0.34 to 2.41 MPa, while the corresponding average ultimate tensile strain varied from 0.276% to 0.450%, depending on the fiber content. Discussion: The formation of multiple microcracks contributed to enhanced ductility and energy absorption capacity, indicating the effectiveness of polyester fibers in improving the post-cracking performance of cementitious composites. Conclusion: The newly developed PES-DFRCC demonstrated significant ductile behavior, characterized by multiple cracking, deflection hardening, and improved tensile performance. These findings highlight the potential of polyester fiber reinforcement for developing durable and ductile cementitious materials for structural applications.Keywords
This publication has 22 references indexed in Scilit:
- Seismic Performance of Precast Brick‐Engineered Cementitious Composite Panels in Confined MasonryEarthquake Spectra, 2026
- Experimental investigation on engineered cementitious composites (ECC) with different types of fibersInnovative Infrastructure Solutions, 2024
- Development of engineered cementitious composite with moderate tensile properties using polyester fibersConstruction and Building Materials, 2023
- Bending behavior of engineered cementitious composites (ECC) with different recycled and virgin polymer fibersConstruction and Building Materials, 2022
- The effect of fly ash content on flexural performance and fiber failure mechanism of lightweight deflection-hardening cementitious compositesConstruction and Building Materials, 2021
- Deflection hardening behaviour of ductile fibre reinforced magnesium phosphate cement-based compositeCement and Concrete Composites, 2021
- Evaluation of cost-effective hybrid fiber reinforced ECCSādhanā, 2021
- Influence of fibre type on flexural behaviour of self-compacting fibre reinforced cementitious compositesCement and Concrete Composites, 2014
- Tensile strain-hardening FRC composites: Historical evolution since the 19602007
- Flexural responses of hybrid steel–polyethylene fiber reinforced cement composites containing high volume fly ashConstruction and Building Materials, 2007