Twisting & Bending Performance of a Subscale CORC Cable-in-Conduit-Conductor for Fusion and Detector Magnet Applications
- 30 December 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Abstract
Future magnetic confinement fusion machines and detector magnets will likely utilize high temperature superconducting (HTS) wire and/or tapes, configured in a Cable-in-Conduit-Conductor (CICC) to generate magnetic fields at temperatures above 4.2 K. As such, these CICCs will need to be twisted & bent to meet the design criteria for any given machine. We investigated the critical current (Ic) degradation of a subscale 6-around-1 CICC using Conductor-on-Round-Core® (CORC®) wires after ever increasing deformation. A CORC® wire was inserted into one of six outer openings of an extruded aluminum conduit to form a sub-scale CICC, after which the CICC was twisted to ∼25 cm pitch and the whole assembly was then sequentially bent to nominal radii of ∼50 cm, ∼35 cm, and ∼25 cm. The Ic values at 77 K and self-field when straight and after each deformation step was measured. The CORC® wire Ic was robust to this type of “twisting + bending” deformation, with an overall degradation of ∼10% with respect to the straight, non-twisted wire. We also describe a CICC twisting process that potentially allows twisting of continuous-length CICCs after the CORC® wires are inserted. This method can lead to a scalable fabrication process of long-length CORC® CICCs that are required for manufacture of high-field fusion magnets and detector magnets for high-energy physics research.Keywords
Funding Information
- U.S. Department of Energy
- Fusion Energy Sciences (DE-AC02-05CH11231, DE-SC0018125)
- High Energy Physics (DE-SC140009)
This publication has 14 references indexed in Scilit:
- A 6-around-1 cable using high-temperature superconducting STAR ® wires for magnet applicationsSuperconductor Science and Technology, 2024
- Superconductors for fusion: a roadmapSuperconductor Science and Technology, 2021
- Recent Progress in the Development of CORC Cable-In-Conduit ConductorsIEEE Transactions on Applied Superconductivity, 2020
- Bending of CORC ® cables and wires: finite element parametric study and experimental validationSuperconductor Science and Technology, 2018
- Development of CORC ® cables for helium gas cooled power transmission and fault current limiting applicationsSuperconductor Science and Technology, 2018
- Introduction of CORC ® wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applicationsSuperconductor Science and Technology, 2016
- Study of the Influence of Helical Bending Strain and Perpendicular Self-Field on Critical Current Degradation for Multilayer YBCO TapesIEEE Transactions on Applied Superconductivity, 2016
- Present Status and Recent Developments of the Twisted Stacked-Tape Cable ConductorIEEE Transactions on Applied Superconductivity, 2016
- Cable-in-conduit conductors: lessons from the recent past for future developments with low and high temperature superconductorsSuperconductor Science and Technology, 2015
- Design of an Industrially Feasible Twisted-Stack HTS Cable-in-Conduit Conductor for Fusion ApplicationIEEE Transactions on Applied Superconductivity, 2014