Improved Reynolds-averaged Navier–Stokes modeling strategies for a compressor linear cascade with an open clearance
- 1 July 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Abstract
To improve aero engine efficiency, the engine core size must be minimized. This reduction increases blade tip clearance, challenging accurate performance predictions for small aspect ratio open clearance cascades using Reynolds-averaged Navier–Stokes (RANS) simulations. While direct numerical simulations and large eddy simulations (LES) are effective, their high computational costs limit practicality in compressor design. Thus, enhancing RANS accuracy under open clearance conditions is critical. The study explores whether different modeling standards are needed for large clearance and identifies criteria for turbulence model modification and mesh configurations. Data-driven modifications to turbulence model have improved tip leakage flow predictions in regular cascades. Altering mesh topology has also enhanced predictions. Both approaches are applied individually and combined in RANS simulations, compared with LES results from a controlled diffusion airfoil cascade. The generalized K-Omega (GEKO) turbulence model is modified using data-driven methods based on LES results. Optimization minimizes differences in total pressure loss and blade surface static pressure coefficients between LES and RANS simulations. Based on optimization via neural networks and the non-dominated Sorting Genetic Algorithm II, the modified GEKO model matches LES results for loss distributions, though improvements in static pressure predictions are limited. Mesh topology modifications, including capped mesh and tangential direction adjustments, are tested individually and in combination. Comparison among four configurations shown superior performance when both modifications are applied. Combining these methods enhances RANS simulation accuracy for loss and static pressure predictions in open clearance cascades. Validation against experimental results confirms the approach's potential for accurate performance predictions.Keywords
Funding Information
- National Natural Science Foundation of China (No. 52376027)
- Fundamental Research Funds for the Central Universities
- Natural Science Foundation of Shanghai Municipality (23ZR1435400)
- AECC Industry-University-Research Collaborative Project (HFZL2023CXY001)
- United Innovation Center of Aerothermal Technologies for Turbomachinery
- National Natural Science Foundation of China (No. 52406050)
This publication has 25 references indexed in Scilit:
- Turbulence-induced disturbances and their evolution to stall onset in a compressor cascade using large eddy simulationChinese Journal of Aeronautics, 2025
- Investigation on corner stall prediction and flow control by blended blade and end wall technology in a compressor cascade based on modified Spalart–Allmaras modelPhysics of Fluids, 2022
- Numerical investigation of corner separation flow using Spalart-Allmaras model with various modificationsAerospace Science and Technology, 2022
- Visualization and Time-Resolved Particle Image Velocimetry Measurements of the Flow in the Tip Region of a Subsonic Compressor RotorJournal of Turbomachinery, 2014
- Grid-point requirements for large eddy simulation: Chapman’s estimates revisitedPhysics of Fluids, 2012
- Mesh quality effects on the accuracy of CFD solutions on unstructured meshesJournal of Computational Physics, 2011
- Experiments and Computations on Large Tip Clearance Effects in a Linear CascadeJournal of Turbomachinery, 2010
- A Criterion for Axial Compressor Hub-Corner StallJournal of Turbomachinery, 2008
- Index of Resolution Quality for Large Eddy SimulationsJournal of Fluids Engineering, 2005
- A Numerical Modeling of Endwall and Tip-Clearance Flow of an Isolated Compressor RotorJournal of Engineering for Gas Turbines and Power, 1986