Characterization and Modeling of Commercial ICs for System-Efficient ESD Design
- 14 November 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (6) , 1802-1811
Abstract
Optimizing electrostatic discharge (ESD) protection strategies requires simulation models of both on - and off -die ESD devices, but detailed information about on -die ESD protection is rarely available. Methods are proposed in the following paper to characterize and model the on -chip ESD protection using only measurements, with minimal a priori information about how the protection is implemented. The characterization targets a three-terminal (rather than the traditional two-terminal) protection structure, including the I/O, Vdd, Vss pins, and allows for current to flow between multiple pins simultaneously. A previously-developed behavioral model for TVS devices is used to capture the ESD behavior of the integrated circuit (IC), including its linear, quasi-static, and transient nonlinear response. The approach is used to model the equivalent current that flows through the on -chip ESD protection of two commercial ICs. The model of the on -chip ESD protection is combined with a behavioral model of an off -chip transient voltage suppressor to demonstrate their combined performance in a system-efficient ESD design (SEED) simulation. The model is validated both when the IC is powered- off and powered- on . The SEED model was able to predict quasistatic and peak voltages and currents at the IC with less than a 10% error.Keywords
Funding Information
- National Science Foundation (IIP-1916535)
This publication has 19 references indexed in Scilit:
- A simple frequency response compensation method for current probe measurements of ESD currents2017
- TLP IV characterization of a 40 nm CMOS IO protection concept in the powered state2016
- A Systematic Study of ESD Protection Co-Design With High-Speed and High-Frequency ICs in 28 nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- RC triggered active ESD clamps; How should they behave under powered conditions?2014
- A physics-based compact model for SCR devices used in ESD protection circuits2013
- System-Level ESD Protection Design Using On-Wafer Characterization and Transient SimulationsIEEE Transactions on Device and Materials Reliability, 2012
- Complete Time-Domain Diode Modeling: Application to Off-Chip and On-Chip Protection DevicesIEEE Transactions on Electromagnetic Compatibility, 2011
- ESD protection design for I/O libraries in advanced CMOS technologiesSolid-State Electronics, 2008
- A novel on-chip electrostatic discharge protection design for RF ICsMicroelectronics Journal, 2001
- Whole-chip ESD protection design with efficient VDD-to-VSS ESD clamp circuits for submicron CMOS VLSIIEEE Transactions on Electron Devices, 1999