MORPHOLOGY AND RESISTIVITY VALUE OF FLOURINE-DOPED TIN OXIDE (FTO) USING INDONESIAN LOCAL DIMETHYLTIN DICHLORIIDE (DTMC) PRECURSORS
Open Access
- 30 December 2022
- journal article
- research article
- Published by National Research and Innovation Agency in Metalurgi
- Vol. 37 (3)
Abstract
Transparent Conductive Oxide (TCO) is the main component for solar cell fabrication. One of the promising types of TCO is fluorine-doped tin oxide (FTO). The method used in depositing the conductive layer of FTO is spray pyrolysis with an ultrasonic nebulizer. The precursor is a local Indonesian product, dimethyl tin dichloride (DMTC), with doping ammonium fluoride (NH4F). The variable that used in this study were variations in deposition time (5. 10. 15. 20, and 25 minutes) with a fixed substrate temperature at 300°C and doping variations (un-doped, 2 wt.% doped and 8 wt.% doped) to see the effect of adding F doping to the precursor solution. The resistivity value with deposition time of 5. 10. 15. 20 and 25 minute (2 wt.% doped) is 0.218x100; 0.449x10-1; 1,567x10-2; 0.676x10-2 0.377x10-2 Ω.cm. For doping variations (un-doped, 2 wt% doped and 8 wt% doped) the value is 0.883x10-2; 0.377x10-2; 0.506x10-3 Ω.cm. There is a decreasing trend in the resistivity values obtained along with the increase in deposition time and the addition of doping to obtain better conductive properties. The grain size will increase with increasing deposition time and the addition of doping. The optimum resistivity value obtained in this study was 0.377x10-2 Ω.cm, obtained at the deposition time of 25 minutes with 2 wt.% doping.Keywords
This publication has 26 references indexed in Scilit:
- Preparation, characterization and electronic properties of fluorine-doped tin oxide filmsJournal of Wuhan University of Technology-Mater. Sci. Ed., 2016
- The relationship between the doping levels and some physical properties of SnO2:F thin films spray-deposited on optical glassPramana, 2012
- Fabrication of textured SnO2:F thin films by spray pyrolysisApplied Surface Science, 2011
- Characterization of indium tin oxide (ITO) thin films prepared by a sol–gel spin coating processCeramics International, 2011
- Effects of Sb doping level on the properties of Ti/SnO2-Sb electrodes prepared using ultrasonic spray pyrolysisDesalination, 2011
- Electrical, structural and surface properties of fluorine doped tin oxide filmsApplied Surface Science, 2010
- Characterization of SnO2:F thin films deposited by an economic spray pyrolysis techniquephysica status solidi (c), 2010
- Structural and sensing properties of nanocrystalline SnO2 films deposited by spray pyrolysis from a SnCl2 precursorApplied Physics A, 2008
- Properties of highly oriented spray-deposited fluorine-doped tin oxide thin films on glass substrates of different thicknessJournal of Physics and Chemistry of Solids, 2007
- Fluorine doped tin oxide films from spray pyrolysis of stannous fluoride solutionsApplied Surface Science, 1996