Effect of Cl2 Gas Exposure on the Surface Properties of Electropolished STS316L
Open Access
- 27 October 2025
- journal article
- Published by The Materials Research Society of Korea in Korean Journal of Materials Research
- Vol. 35 (10) , 473-478
Abstract
In this study, the surface characteristics-including roughness, oxide layer thickness, and composition-of the electropolished layer on STS316L steel tubes subjected to double melting via the VIM/VAR process were investigated after exposure to Cl 2 gas. The tubes were exposed to Cl 2 gas for 1 to 13 d to simulate semiconductor conditions. Surface roughness increased with Cl 2 exposure time, showing values of 0.01, 0.04, 0.04 and 0.03 µm after 0, 1, 5 and 9 d, respectively. At the same time, the oxide layer thickness on EPed STS316L, which was initially 8.2 nm, decreased to 3.18, 2.58 after 1, 5 d of Cl 2 exposure, approaching the initial thickness of 2.38 nm observed on non-EPed STS316L. After 9 d, the thickness further decreased to 0.51 nm, with no significant change was observed thereafter. Before Cl 2 exposure, the CrO/FeO ratio was 2.26. After 1, 5, and 9 d of exposure, the ratio decreased to 2.06, 1.75, and 1.27, respectively. In addition, the penetration depth of Cl into the oxide layer increased with longer exposure time. These results suggest that the formation of chromium chlorides led to the breakdown of the stable Cr 2 O 3 layer.Keywords
This publication has 19 references indexed in Scilit:
- Graphene coating on a nickel-copper alloy (Monel 400) for microbial corrosion resistance: Electrochemical and surface characterizationsCorrosion Science, 2021
- Vacuum induction melting and solidification of TiAl-based alloy in graphite cruciblesVacuum, 2018
- Surface morphology and passive film composition after pickling and electropolishingSurface Engineering, 2017
- Surface treatment and corrosion behaviour of austenitic stainless steel biomaterialIOP Conference Series: Materials Science and Engineering, 2017
- XPS depth profiling analysis of passive surface layers formed on austenitic AISI 304L and AISI 316L SS after high-current-density electropolishingSurface and Coatings Technology, 2015
- Electrochemical characteristics of stainless steel using impressed current cathodic protection in seawaterTransactions of Nonferrous Metals Society of China, 2009
- The effects of vacuum induction melting and electron beam melting techniques on the purity of NiTi shape memory alloysMaterials Science and Engineering: A, 2006
- High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite cruciblesJournal of Alloys and Compounds, 2004
- The implications of chlorine-associated corrosion on the operation of biomass-fired boilersProgress in Energy and Combustion Science, 2000
- High Purity Water for Semiconductor Manufacturing1988